Enjoy refreshing, chilled water straight from your filtered water supply. Especially selected by TapSpares for its superior performance and compatibility with most filtered water taps. Fits neatly under your kitchen sink and easy to connect to your tap - comes supplied with a selection of fixtures and fittings needed.
Our undersink chiller is designed to connect in-line on a cold filtered water supply.
Important Note: the chiller is not suited for connection to a standard tap's cold water supply. It comes supplied with push-fit fittings to suit 1/4" or 3/8" pipes which are generally the sizes supplied with water filter systems. If you are unsure whether or not the chiller is going to work with your tap/system, feel free to email
support@tapsparesuk.com with the details of what you have an we'll do our best to help.
- Easy fit from new or retrofit
- 370mm high x 180mm wide x 320mm deep
- Fits alongside a 2L or 4L QETTLE boiler tank into a standard 600mm wide kitchen cabinet
- Dispenses up to 9 litres of water per hour of filtered drinking water down to 4°C
- 1.2 litre tank capacity
- 15 minute recovery time, should tank be exhausted
- Superior quality, stainless steel build and construction
- CE approved
- 2 year warranty
Please check the dimensions to make sure you have sufficient space for the chiller before ordering. It is essential that there is space around the chiller to allow air to circulate around it to prevent overheating.
Please note, this chiller is NOT SUITABLE for Franke MINERVA boiling water taps.
